• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a subaru keys made Key Fob at Home

Depending on how brand new your Subaru is, you might need to have your key fob programmed by a dealer or an automotive locksmith. This is typically accomplished by connecting a machine for programming to the computer in the vehicle.

To program your Subaru begin by opening the driver's doors using the door button control, and then close it. You will hear a chime on the instrument panel and the dome lights will flash.

Step 1: Find the circuit board for your transmitter

There are many ways to program your key fob. The first step is to know which kind of key fob you own. You can determine this by looking at the key fob's shape or by listening to your car for a sound.

Once you have the necessary information, you can start the process of programming your key fob at home. To accomplish this, you'll require a key made of steel and a screwdriver with a flat head. Open the key fob case by twisting it. Insert the key made of metal into the case. Then let go of the battery by pressing the tabs that hold it in place. Replace the battery and then put the case back together.

Step 2: Disconnect the key fob case

It is a good idea to replace the battery in key fobs if they're not working. In some cases, the buttons on the key fob may be broken. If you notice that the contacts made of metal on the button have come loose, try soldering them in place again to make them function again.

Before you begin the process, make sure your vehicle's doors are closed and that your ignition is turned off. You can accomplish this by closing the driver's door, and then pressing the door button ten times in rapid sequence. After that, you'll hear the instrument panel chime, and your dome lights will flash. This indicates that you're ready to proceed.

Step 3: Insert the fob for the key into the ignition

There are lots of articles online that will give you instructions on how to program a new or replacement spare subaru key key fob at home, however they are not particularly specific. Programming an electronic key is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine turned off. Use the door button to open all doors. Open and close the driver's doors two more times. Then insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will sound a chirp when the settings are changed.

Step 4 Step 4: Turn on the ignition

Before proceeding with this method of programming a key fob, it is important to note that this process only works if you own one working key already. If you do not, then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

After the key is programmed, it will be able to start your vehicle within about five minutes. Begin by closing all doors and shutting off the engine. Next, get in the driver's seat and unlock all doors with the door button control. Put the key into the ignition and then turn it to the first position. The electrical systems will be activated, however the engine will remain off. Repeat this process 10 times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of premium automobiles with key fobs that lock and unlock doors, start the engine, and defrost windows. These gadgets can sometimes stop functioning.

Find a locksmith or dealer to fix the problem. This will solve the issue and make sure that your vehicle is secure.

You must first open and close the driver's side door. Then, you need to place the key in the ignition and switch it to the initial position. Then, reverse it to the off position. Repeat this ten times an order as fast as you can. After tenth attempt, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery on a subaru key car key fob, the procedure is simple. First, open the exterior fob casing. Then you can use a flathead screwdriver to push open the internal case and remove the old battery.

After taking out the old battery, put in the new one and close the case. Next, sit in the driver's seat, and unlock all the doors with the door button control. Place the key in ignition and turn it so that the electrical system is turned on, but the engine remains off. Repeat this 10 times until you hear a chime on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when unlocking or locking a subaru car keys replacement Key Fob from outside of the vehicle can be a distraction for certain owners. In some instances you can deactivate the chirp by opening and shutting all doors while double-clicking the lock button on the key fob.

Close all doors, including the lid for the fuel-filler, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After this is done the instrument panel emits an audible chime. The chirp indicates that the door and fuel-filler lid are locked. It is possible to change the setting to make doors lock automatically without pressing a switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number.

Note down the first series of 8 numbers and keep it in your wallet. Now, get into the driver's chair, close the doors and turn the ignition to the first position. After 10 turns, your instrument panel should chime once.

The circuit board that controls the transmitter is inside the key fob case. The circuit board should contain one or two numbers with 8 digits. Note the sequence that starts with the first number, and follow the steps in this guide to register the code on the system of your vehicle. For older models, this process might require a visit to the dealer.