• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Door Lock Repairs

Over time, wear and tear can lead to lock malfunctions. There are fortunately, a number of easy and efficient steps that can help restore your uPVC patio door's security.

These easy fixes will ensure your home is secure, whether you realign the lock or clean the locking mechanism.

Clean the Lock

Although patio doors are a great option to bring the outside in and keep the elements out however, they can also pose an issue for security if your lock isn't working as it should. As time passes wear and tear, cold and hot weather dirt and debris can cause damage to the lock of your patio door and cause it to become difficult to open. With a little maintenance, you can ensure your patio door's locks always work properly.

It is important to first clean the patio door lock as well as all moving parts. This will help get rid of any grime or coatings that might be hindering the lock from working effectively. Start by wiping all the moving parts of your patio door lock using an aqueous cloth. Then, use a scouring cloth or a damp, rough cloth to scrub the areas that are soiled of the door and frame. It is recommended to wipe the entire lock with dry cloth to get rid of any remaining dampness and allow it to air dry prior to using it again.

If you have a patio door that uses pin tumbler latch mechanisms, you can apply lubrication to the lock by applying graphite powdered to the key or by using a lubricant made of Teflon, like WD-40 Multi-Use. This type of lubricant is easy to apply, and doesn't break down over time. If you're not able to locate a suitable lubricant, you could use a pencil with a thick tip. Put the pencil into the lock and jiggle it around to spread the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio repair near me doors clear from dust, dirt and other debris. They are particularly susceptible to ice and snow which can cause them to become stuck or slack and make it difficult for your patio doors to open and close.

The sliding rails of the patio door track and rollers can be cleaned by removing any dirty or damaged weather stripping, cleaning them, then reinstalling it. The same is true for rollers on patio doors, which can be wiped down and then sprayed with a non-stick lubricant to help them move freely.

Lubricate the moving parts

uPVC French doors, like sliding glass patio doors repair patios, are operated with 3 to 4 or sometimes, 5 points locking mechanisms. These include the handle and lock cylinder that is operated by a key. These doors also require maintenance, including lubrication of the moving parts. This can be done with an oil that is thin (never WD40) and is recommended to be done at least once per year.

If sagging hinges aren't a cause, the door could be misaligned and caught or rubbing against the strike plate's hole in the frame. The solution is to remove the strike plate and then use a sharp chisel to enlarge the mortise that it rests in. This will permit the latch to fit into the hole and also prevent it from rubbing against the frame.

Once the cylinder is cleared of the way and out of the way, measure its width using the help of a book or piece wood that fits into the gap of adjustment screw above the lock. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw until the end of the cylinder.

Check the Lock's Width

If your patio door latch is hard to turn, even after oiling and cleaning it's possible that it's not aligned properly with the strike plate. Check if your door is in a balanced position, and if the hinge screws are in good condition. In most cases, however, simply moving the strike plate downwards or upwards could solve the issue.

The most common issue is when the strike of the lock is too small for the latch to properly engage. In this situation you'll have to increase the hole using the hammer or chisel and then test the latch to make sure that it contacts the strike plate without rubbing against or catching on the door's frame jamb.

You must identify the kind of mortise lock that you are using before you purchase a replacement. This can be done by looking at the faceplate and determining if it is square or round. Then, take a look at the screw holes on the existing lock and note the size of each one. This will help you to locate an alternative lock that is the exact same width and will fit into your existing hole.

You'll need to identify the mortise lock, and then examine it for bends, scratches or other damage that need to be repaired. A damaged or bent latch is more likely than one that has frequently used to break. Replace the lock if it shows signs of damage.

After you've determined the type of lock replacement that you require Now it's time to begin the actual repair patio doors. Take the old handle and spindle from the patio door, and then put in the new one. Start by installing the interior handle. Align it with the spindle and then secure it into by using two bolts or screws. Once the interior handle is installed, put in the handle on the outside and screw it in the position as well. Once you have completed these steps check the handles to make sure they are able to open and close easily and that the latch engages correctly with the strikeplate.

Make sure you check the Strike of the door.

The strike plate and the door latch are two pieces that work together in order to lock the door. If they are not aligned properly and the latch isn't latching the door shut correctly. Fortunately, this issue is often easy to fix.

First, check the holes in the strike plate's receiving to ensure they are clear of obstructions, such as dirt or plastic plugs. Then loosen the keeper screws that secure the strike plate in place, allowing it to move vertically, but not separating it from the door frame. Then, you can adjust the strike plate until its holes for receiving align with the latch hooks on the door latch. Once the strike plate has been adjusted then tighten all screws, and test whether the door shuts smoothly.

Door strike plates can be difficult to access for homeowners who have sliding patio doors, but they're crucial to lock and unlock your door. The metal plates are situated on the top and bottom jambs of your door, where they support its latch. The door latch slides into this strike plate and creates a seal. If the strike plate has been damaged or rusted or not properly installed, the latch may not lock the door properly.

A misalignment of the latch and strike plate is the most common reason for the patio lock to not close or remain in place. This can be verified using the "lipstick" test. Apply a little lipstick across the edge of the deadbolt tilt and slide patio door repairs near me then cover it with masking tape. The lipstick will leave a mark when you shut the door. This will reveal exactly where the latch joins the strike plate. If the mark is too low or high, you can alter the strike plate.

The sliding patio door locks keep your home safe from burglars, and if they're not functioning correctly, you must fix the problem quickly. Follow these easy steps to repair your patio door lock repairs near me door lock and restore its function.